This article describes the troubleshooting steps common load cell through the more standard approac

Why Japanese shouted year suffered "the gates of hell." rubber foam
This article describes the troubleshooting steps common load cell through the more standard approach to troubleshooting, to improve efficiency.
Under the zero output, which in the case of no load sensor output value of all loads (including static load scale body, power transmission parts, etc.) have to be removed, the test load cell output. The resulting value of zero at the test sensor should be installed in the design requirements of the state of the sensor, to prevent the error caused by the weight of the impact sensor itself. The sensor should rubber foam be connected to the power supply, rubber foam the best use of the product specification or sample recommended excitation voltage. Millivolt output value of the test record sensor excitation voltage divided by the sensor, you come to the zero value of the sensor output (mV / V). Comparative value of the output rubber foam value of the sensor on the certificate (if possible) or with the corresponding sample sensor's data can be derived zero output of the sensor is qualified conclusions.
The sensor is individually connected to the power supply, the use of excitation voltage l0 ~ 15VDC. The output end of the sensor in the millivolt table (or multimeter in DC millivolt range), based on the use of state of the sensor is installed in the loading end of the load sensor, the sensor output changes observation.
Login Username: Password: rubber foam Forgot Password Login Remember Me